DNKa' Liquid Acrygel #0019 Gelato 15 ml

Characteristics and Consistency

DNKa’ Liquid Acrygel is a collection of three-phase liquid acrygels designed for nail strengthening, leveling, extensions, and nail plate repair. Suitable for thin and sensitive nails, it has a medium-fluid consistency. It provides excellent leveling and strengthening for both short and long nails. The gel does not deform during wear and maintains the ideal shape and architecture of the nails until the next correction.

The product is available in a wide range of shades with varying pigmentation levels, from sheer, translucent finishes to a perfectly snow-white shade with 100% coverage.

For better adhesion to the natural nail plate, DNKa’ Rubber Base or Multi Base is recommended as a base coat, applied in a thin layer.

Key Benefits

• Consistency: Medium-fluid.

• Ease of application: The medium consistency makes application and modeling easier for nail technicians of all skill levels.

• Pigmentation: 5%–100%.

• Versatility: Suitable for both short and long nails.

• Stability: The gel retains its shape and maintains the desired nail architecture without deformation.

• Purpose: Nail strengthening, extensions, infills, and reconstruction.

The stated results can be achieved when the product is used as part of the complete DNKa’ system and in accordance with the recommended application technique.

Application Instructions

Step 1: Perform standard mechanical preparation of the natural nail plate.

Step 2: Clean the nail using Nail Prep & Cleanser.

Step 3: Apply DNKa’ Dehydrator to the nail plate.

Step 4: Apply DNKa’ Ultrabond over the entire nail plate using a wiped, nearly dry brush. Avoid product buildup to ensure additional adhesion. Allow 30–60 seconds for the product to evaporate.

Step 5: Apply your chosen base coat and cure.

Step 6: Apply one layer of DNKa’ Liquid Acrygel over the nail plate.

Step 7: Cure under a 48 W LED/UV lamp for 2 minutes. If necessary, repeat the procedure and apply a second layer to create the desired nail architecture.

Step 8: Cure under a 48 W LED/UV lamp for 2–3 minutes.

Step 9: Remove the sticky inhibition layer using DNKa’ Nail Prep & Cleanser.